Evolution 80GX Spezifikationen Seite 24
- Seite / 32
- Inhaltsverzeichnis
- LESEZEICHEN
Bewertet. / 5. Basierend auf Kundenbewertungen
24 Hangar 9 Sukhoi SU-26MM SE
4. Repeat Steps 1 though 3 to install the remaining wing
panel.
5. Attach the canopy hatch to the fuselage using the
four 4-40 x 1/2-inch button head screws and four #4
nylon washers that were removed at the beginning
of the radio installation. Tighten the screws using a
5/64-inch hex wrench.
Decal Placement
Required Parts
Decal sheet Completed airframe
Required Tools and Adhesives
Paper towel Spray bottle with water
Plastic squeegee Dish washing liquid
Hobby scissor
Hobby knife with #11 blade
When applying the decals for your model, use a spray
bottle and a drop of dish washing liquid sprayed in the
location of the decal to allow repositioning of the decal.
Use a paper towel as a squeegee to remove excess water
from under the decal. Allow the model to rest overnight so
the remaining water can evaporate.
Center of Gravity
An important part of preparing the aircraft for flight is
properly balancing the model.
CAUTION: Do not inadvertently skip this step!
The recommended Center of Gravity (CG) location for your
model is 7
5
/
8
-inch to 8-inch (194mm–203mm) located at the
wing root near the fuselage. Measure back from the leading
edge as shown and mark the location of the CG on the
bottom of the wing with a felt-tipped pen.
With a helper, lift the aircraft with your index finger at the
location marked on the wing. Make sure the aircraft is
upright when checking the CG. If the nose of your aircraft
hangs low, add weight to the rear of the aircraft. If the tail
hangs low, add weight to the nose of the aircraft. Stick-on
weights are available at your local hobby store and work well
for this purpose.
After the first flights, the CG position can be adjusted for
your personal preference.
- Sukhoi SU-26MM SE 1
- 2 Hangar 9 Sukhoi SU-26MM SE 2
- Included Parts Listing 3
- 5Hangar 9 Sukhoi SU-26MM SE 5
- Required Adhesives 6
- Field Equipment Required 6
- Optional Field Equipment 6
- Before Starting Assembly 6
- Receiver Installation 6
- 7Hangar 9 Sukhoi SU-26MM SE 7
- 3D Flight 8
- Precision Aerobatics 9
- 10 Hangar 9 Sukhoi SU-26MM SE 10
- 11Hangar 9 Sukhoi SU-26MM SE 11
- 12 Hangar 9 Sukhoi SU-26MM SE 12
- 13Hangar 9 Sukhoi SU-26MM SE 13
- 14 Hangar 9 Sukhoi SU-26MM SE 14
- 15Hangar 9 Sukhoi SU-26MM SE 15
- 16 Hangar 9 Sukhoi SU-26MM SE 16
- 17Hangar 9 Sukhoi SU-26MM SE 17
- Engine Installation (DA85) 18
- 19Hangar 9 Sukhoi SU-26MM SE 19
- 20 Hangar 9 Sukhoi SU-26MM SE 20
- Stabilizer Installation 21
- Landing Gear Installation 22
- Wing Installation 23
- Decal Placement 24
- Center of Gravity 24
- Control Throws 25
- Preight 26
- Range Test Your Radio 27
- Daily Flight Checks 27
- Warranty and Repair Policy 27
- Warranty Services 28
- European Union 29
- Aeronautics Safety Code 29
- 30 Hangar 9 Sukhoi SU-26MM SE 30
- DA 85 Mounting Template 31
- © 2010 Horizon Hobby, Inc 32
- Hangar9.com 32
Verwandte Produkte und Handbücher für Motor Evolution 80GX
Motor Evolution EVO200 Bedienungsanleitung
(24 Seiten)
(24 Seiten)
Fujitsu LKN:U5540M0005SE Handbücher
Bedienungsanleitungen und Benutzerhandbücher für Notebooks Fujitsu LKN:U5540M0005SE.
Wir stellen 1 PDF-Handbücher Fujitsu LKN:U5540M0005SE zum kostenlosen herunterladen nach Dokumenttypen zur Verfügung Datenblatt
Kommentare zu diesen Handbüchern