Evolution EVO180 Bedienerhandbuch PDF herunterladen (Seite 12)

www.evolutionsteel.com

ON/OFF Trigger Switch

This machine is equipped with a safety start trigger

switch.

To start the machine:

• Push in the safety lock button on the side of the

handle with your thumb.

•Depress the main trigger switch to start

the motor. (Fig. 8)

Chip Collector

This machine is tted with a chip collector to

capture metal chips. The chip collector cover plate

is provided with a transparent ‘window’ so that the

operator can see the contents and empty when

necessary.

To remove and empty the chip collector:

• Loosen the two chip collector thumb screws.

• Ease the chip collector from the machine.

• Empty the contents of the chip collector by

tipping the collector upside down over a suitable

waste container, allowing the contents to fall out.

Note: To maintain operational efciency we

recommend that the collector is emptied when

approximately 60% full. Dispose of the contents of

the chip collector in an environmentally responsible

manner.

• Replace the chip collector and securely tighten

the (2) thumb screws.

Discharge Port

When cutting wood the Discharge Port Exhaust

should be tted to the chip collector cover

Discharge Port.

To t the Discharge Port Exhaust

• Remove the Discharge Port blanking cover by

unscrewing the cross headed screw.

• Pull the blanking cover from the

Discharge Port and safely store for future use.

• Fit the Discharge Port Exhaust in place of the

blanking cover. (Fig. 9) Wood chips will be ejected

from the Discharge Port Exhaust during cutting

operations.

When cutting has been completed, remove the

Exhaust Port and replace the blanking cover and

tighten the xing screw securely.

FIG 7

FIG 8

FIG 9

1 2 ... 7 8 9 10 11 12 13 14 15 16

Kommentare zu diesen Handbüchern

Keine Kommentare

Evolution EVO180 Bedienerhandbuch Seite 12

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Elektrowerkzeuge Evolution EVO180