www.evolutionbuild.com
9
WARNING: If any parts are missing, do not
operate your mitre saw until the missing parts
are replaced. Failure to follow this rule could
result in serious personal injury.
CARRYING YOUR MITRE SAW
Safety Advice
1. Although compact, this saw is heavy. To
reduce the risk of back injury, get competent
help whenever you have to lift the saw.
2. To reduce the risk of back injury, hold the tool
close to your body when lifting. Bending your
knees so you can lift with your legs, not your
back. Lift by using the handhold areas at each
side of the bottom of the base.
3. Never carry the table mitre saw by the power
cord or the trigger grip of the handle. Carrying
the tool by the power cord could cause damage
to the insulation or the wire connections
resulting in electric shock or fire.
4. Before moving the saw tighten the mitre
and bevel lock knobs to guard against sudden
movement.
5. Lock the cutting head in its lowest position.
Ensure that the cutting head locking pin is
completely engaged in its socket.
WARNING: Do not use the blade guard as a
‘lifting point’. The power cord must be removed
from the power supply before attempting to move
the machine.
• Lock down the head using the head locking pin.
• Loosen the mitre angle lock knob. Push down the
mitre angle lever and rotate the table to either of its
maximum settings.
• Lock the table in position using the locking knob.
• Use the two carry handle cut-outs machined
into either end of the machine base, to transport
the machine.
Place the saw on a secure stationary work
surface and check the saw over carefully.
Check particularly the operation of all the
machines safety features before commissioning
or operating the machine.
SAFETY LABELS & SYMBOLS
WARNING: Do not operate machine if warning and
/ or instruction labels are missing or damaged. Contact
Evolution Power Tools for replacement labels.
Only use genuine Evolution replacement saw
blades. Unauthorized blades may be dangerous!
Keep saw blades securely fastened. Check the
blade flanges for debris before installing any
new blade. Do not use dull, broken or damaged
blades. Check the blade regularly for condition
and wear. A damaged or worn blade should be
replaced immediately. Beware of ejecting chips
as they may be HOT. Always make provision
for the safe handling of excess material. Keep
machine base and rotary table free from dirt and
other debris.
To obtain an additional copy of your manual,
please contact Evolution Power Tools at:
UK 0870 609 2297
WEB www.evolutionpowertools.com
RAGE 6
Symbol Description
V Volts
A Amperes
Hz Hertz
Min
-1
Speed
~ Alternating Current
n
o
No Load Speed
Wear Safety
Goggles
Wear Ear Protection
Do Not Touch
Wear Dust Protection
Restriction
of Hazardous
Substances Directive
CE certification
Waste electrical and
electronic equipment
(16 Seiten)
(7 Seiten)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern