Evolution EVO230-HDX Bedienungsanleitung PDF herunterladen (Seite 2)

Operating Instructions

Important

Please read these operating and safety instructions carefully and

completely. For your own safety, before using this equipment

check that the voltage is correct and that all handles and parts are

rmly secured. If you are uncertain about any aspect of using this

equipment contact your distributor.

Please Keep These Instructions

Model EVO230-HDX Specications

Motor (230v or 115v 50/60 Hz) (Watts): 1750

Maximum Box (1/4” 6mm Wall 90

): 3-1/4” 84mm

Maximum Box (1/4” 6mm Wall 45

): 2-1/16 53mm

Optimum Cutting Thickness (Mild Steel Plate): 1/2” 12mm

RPM No Load (min-1): 2700

Recommended Maximum Duty Cycle (Minutes): 30

Sound Pressure Level (Under Load) (dB(A)): 108.7

Vibration Level (Under Load) (m/s

): 3.9

Weight: 19-3/4lbs 9.0kg

Maximum Dimensions: 14-1/2”x15-3/4”x19-3/4” 370x400x500

Minimum Dimensions: 10”x12-3/4”x19-3/4” 250x325x500

Blade Dimensions

Maximum Diameter: 9” 230mm

Bore Diameter: 1” 25.4mm

Thickness: 1/16” 2mm

Standard Equipment Supplied With Unit: 1 Side Handle, 1 Fence Guide,

1 Safety Goggles, 1 Spanner attached to unit, 1 Carry Case, 2 Batteries,

Ear Plugs, 1 Operating Instructions.

Ear and eye protection MUST be worn while operating this

equipment. Do NOT touch the blade while it is in motion. Always

follow the Personal Protection Equipment (PPE) recommendations

while operating this tool.

This machine is designed for cutting steel using the appropriate TCT

(Tungsten Carbide Tipped) blades and accessories. It should NOT be

modied and / or used for any application other than for which it was

intended, including powering other equipment.

Ensure that the total work area can be viewed from the operating position.

Use barriers to keep people away. Do not operate the tool in explosive

environments – power tools create sparks that may ignite ammable

materials or gases. Do not operate the tool in damp or wet conditions,

as electric shocks may result. Always use both hands to operate the

tool. Always ensure that the material you are working on is securely

clamped.

• This tool is equipped with an approved cord and plug for its intended

Country of use.

• Remove plug from power supply before replacement of the blade,

making adjustments or other maintenance work.

• Use only genuine EVOLUTION brand saw blades.

• Inspect the machine and blade before each use and do not use

deformed, cracked, worn or otherwise damaged blades.

• Ensure the blade is correctly mounted and is appropriate for the

material to be cut.

• Do not use blades made of high-speed steel.

• Do not use blades that do not comply with the characteristics

specied in these instructions.

• Do not stop the blade by lateral pressure on the disc.

• Ensure that moveable guards operate freely without jamming.

1 2 3 4 5 6 7 ... 32 33

Kommentare zu diesen Handbüchern

Keine Kommentare

Evolution EVO230-HDX Bedienungsanleitung Seite 2

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Kreissägen Evolution EVO230-HDX